Strobe Battery Powered Magnetic Base


Strobe Battery Powered Magnetic Base
Quantity in Basket: None
Code: 7402
Price: $98.00
Shipping Weight: 5.00 pounds
Lens Color:
Red 
Amber 
Blue 
Clear 
Green 
 
Optional "D" Size Battery Holders for Customer supplied batteries (Set of 2) Add $10.00



 

Model 7402 Portable battery operated Strobe light is a single flash 3.8 Joule unit drawing .48 amps, uses two 6 VDC spring terminal lantern batteries (not included),
and a heavy magnetic base, please specify lens color when ordering.

Optional "D" size battery holders can be selected above to allow for the use of customer supplied "D" size batteries instead of lantern batteries--8 of the "D" size batteries are required and extend the duty time of the light significantly. Overall Light Dimensions are 9 1/2" tall, by 7 1/4" wide by 4" in diameter.

What a GREAT Product! Use it indoors for caution light, or to mark hazards, or use it outdoors for construction, hazards,etc! Attention getting flash!

  • Voltage available: 12 VDC (2 of a 6VDC Lantern Battery not included, or optional "D" size holders for customer supplied batteries) 
  • Operating Current: .48A
  • Temperature Range: Not Available
  • Indoor /Outdoor Use
  • Listings: None

  • A word about application:

    Battery powered lights like these, because of their relatively LOW effective light output, the purpose of which is to extend the life of the batteries, don't lend themselves to use in bright ambient light areas, or where outdoor sunlight would be a factor.  Ideally, these lights are to be used mounted at heights ranging from ground level to 8 feet above ground. This height would allow them to be seen by people looking toward the light from distances of 10 feet to hundreds of feet away--again depending heavily on how well lit the area is with overhead lighting if indoors, etc.  The best mounting height for visibility is at eye level--on the same horizontal plane-4.5 to 5.5 feet or so. The greatest achieved brightness of the light produced by the signal is viewed at the light's lens "center" on axis--or the same horizontal plane in this case. Although some flashing "incandescent or LED bulb" lights are similarly designed utilizing a fresnel lens to distribute the light produced, their light output differs from a strobe "burst" of light in that a "flashing Incandescent or LED bulb" device does not emit a semi-hemispherical burst of light like a strobe light does.  In other words, a strobe light would be more effective if your application requires a greater level of effectiveness. Please contact us for any assistance you may require in choosing the correct signal.

    Good, Best Rating:   Best

  • Indoor /Outdoor Use
  • Candela: 200