Battery Powered Flashing LED 630
Model 630LED Portable battery operated Flashing LED Light utilizes 4 LED bulbs to project an omni-directional light pattern.
Integrated pushbutton switch allows for steady burn or flashing mode. Uses two 6 VDC spring terminal lantern batteries (not included),
has a heavy magnetic base, an external on/off switch, dimensions: 5" diameter and 10" high, specify dome color above when ordering.
Optional "D" size battery holders can be selected above to allow for the use of customer supplied "D" size batteries instead of lantern batteries--8 of the "D" size batteries are required and extend the duty time of the LED light significantly.
A word about application:
Battery powered lights like these, because of their relatively LOW effective light output, the purpose of which is to extend the life of the batteries, don't lend themselves to use in bright ambient light areas, or where outdoor sunlight would be a factor--these types of lights are NOT effective in sunlight. Ideally, these lights are to be used mounted at heights ranging from ground level to 8 feet above ground. This height would allow them to be seen by people looking toward the light from distances of 10 feet to hundreds of feet away--again depending heavily on how well lit the area is with overhead lighting if indoors, etc. The best mounting height for visibility is at eye level--on the same horizontal plane-4.5 to 5.5 feet or so. The greatest achieved brightness of the light produced by the signal is viewed at the lights lens "center" on axis--or the same horizontal plane in this case. Although strobe lights are similarly designed utilizing a fresnel lens to distribute the light "burst", their light output (burst) differs from simple "flashing bulb" lights whether they be LED bulbs or Incandescent bulb devices--In other words, a strobe light would be more effective if your application requires a greater level of effectiveness than the effectiveness described above for the Flashing Light 630LED. Please contact us for any assistance you may require in choosing the correct signal.
- Voltage available: 12 VDC (2 of a 6VDC Lantern Battery not included, or optional "D" size holders for customer supplied batteries)
- Listings: None
- Indoor /Outdoor Use
Good, Best Rating: Good
|7402||Strobe Battery Powered Magnetic Base||