Horn Hazardous Location Div 2
Hazardous Location horn produces sound by electro-mechanical vibration of a stainless steel diaphragm. The horn mechanism with diaphragm is attached to the grille. The water- and dust-tight backbox is ideal for indoor or outdoor use. The Model 350WBX features a die-cast zinc housing with a corrosion- resistant polyurethane finish. The rugged outer grille resists vandalism without reducing sound output. The 350WBX is fused and utilizes a terminal block wiring connection. Vibrating horns are excellent for general alarm, start/dismissal, coded paging and process control signaling in areas where their sound output exceeds ambient noise levels. Compact size and a variety of installation options make them ideal for industrial use. This hazardous location rated/certified horn is intended for use in potentially electrically classified hazardous atmospheres. Applications for this product are found in the oil and gas, and petrochemical industries, where moderately high decibel vibrating horn signals are required. Two mounting brackets are provided on either side of the unit for wall mounting. The housing is tapped on three sides for 3/4" (2) and 1/2" (1) to allow for field wiring installation. For use in hazardous atmospheres where a distinctive, urgent signal is required for timing, scheduling, paging and general alarm applications. Typical applications include use in mines, petroleum plants, gas plants, grain elevators, flour mills, paper mills, textile plants and tankers, as well as many others. UL and cUL Listed for Class I, Division 2, Groups A,B,C,D; Class II, Division 2, Groups F & G; Class III, UL Listed for outdoor locations, NEMA Type 4X, 100dBA output at 10 feet. 120VAC.
- Voltage available: 120VAC, other voltages please inquire.
- Operating Current: .0.180A at 120 Volt AC
- Temperature Range -65°F to 104°F:
- Audible Rating: 100dBA @ 10'
- Mounting: flat surface bracket and 3/4" & 1/2" NPT conduit entry
- NEMA 4X
- Listings: UL and cUL Listed for Class I, Division 2, Groups A,B,C,D; Class II, Division 2, Groups F & G; Class III
- Tones: Vibrating horn
|878EX-N5||Horn Vibrating Explosion Proof||
|105XBRi||LED Status Light Red, Amber, Green, Div 2-105XBRi||
|490STdiv2||Strobe Division 2 Hazardous Location||
|AST-14||Strobe Hazardous Area Rated NEMA 4X||
|5530M||Audible Signal High Volume with Tone selection 5530M-N5||
|DB3BULG110N2CNR||Sounder Speaker Amplifier||
|RMS-6T-EXP-WP||Pull Station Explosion Proof||
|3124XLP||Explosion Proof LED Light||
|1002WEP||Sounder Electronic Explosion Proof||
|AST-4K||Strobe Explosion Proof Rated Class I Div 1||
|58||Rotating Light 58-N5||
|450EWBX||Horn Hazardous Location Div 2 24 Volt DC||
|116EXMRINH||Explosion Proof Rotating Light||