Andon Tower Light LED 56mm 5 Color

Andon Tower Light LED 56mm 5 Color
Quantity in Basket: None
Code: PRE-F-5
Price: $199.95
Shipping Weight: 4.00 pounds
Select Voltage:
120VAC 
240VAC 
24VDC/VAC 
12VDC/VAC 
Select Pole/Pipe Option:
43mm (1 3/4 inch) Pole & M20 Nut MAP-M043 Add $3.50
240mm (9 1/2 inch) Pole & M20 Nuts MAP-M240 Add $11.00
22mm (7/8 inch) Pole for Tulip Base MAP-0022 Add $1.40
240mm (9 1/2 inch) Pole for Tulip Base MAP-0240 Add $6.20
750mm (29 inch) Pole for Tulip Base MAP-M750 Add $25.95
1/2 inch NPT conversion nipple MAP-N033 Add $8.50
750mm (29 inch) Pole & M20 Nuts MAP-M750 Add $34.95
Mounting Option:
Tulip Base-(select correct Tulip Base Pole without Nut-select above) Add $1.90
Right angle bracket-(requires pole with nuts) Add $3.75
Additional Options:
 
Flashing (FREE)Option 
Right Angle bracket with wiring cavity-(requires Tulip Base above, And Pole with no nuts-select above):
Right Angle bracket with wiring cavity-(requires Tulip Base above, And Pole with no nuts-select above) Add $10.50
Quantity:
Right Angle Steel Bracket
Right Angle Steel Bracket 		240mm Pole with M20 Nuts
240mm Pole with M20 Nuts 		1/2 inch NPT conversion
1/2 inch NPT conversion
Right angle bracket with cavity and tulip
Right angle bracket with cavity and tulip 		43mm Pole with M20 Nut example
43mm Pole with M20 Nut example 		Tulip base and short 22mm pole
Tulip base and short 22mm pole
Right Angle Steel bracket and 43mm pole with nut
Right Angle Steel bracket and 43mm pole with nut

Model PRE-F LED Andon Tower Light 56mm (2 1/4 inch diameter)is capable of either Continuous burning (standard), or flashing (now a FREE option) the LED light. Pre-wired and pre-assembled, this unit can be used with the mounting options shown above (use "check box" selection). Specify the color of the five color tower by selecting all 5 colors shown above in the "check boxes" above, the tower will be all of the 5 colors shown, the buzzer option is NOT available for the 5 color LED Andon stack--please inquire for custom solutions if an audible is required with a 5 color andon. Lenses are heat and shock resistant polycarbonate. Prism-cut lens design provides superior light diffusion, 80 flashes per minute if used in a flashing mode. LED lamps resist vibration, and virtually eliminates maintenance. IP56 rated. CE compliant, Specify Voltage by selecting above. If you prefer a turnkey solution, please see the PREF-110-3-Custom on our site for an example of our popular assembled versions--please inquire.

An LED Tower Light at a price that will not break the bank!

  • Voltage available: 12VDC/12VAC, 24VDC/24VAC, 110VAC, 240VAC
  • Operating Current: from 155mA to 275mA depending on voltage
  • Temperature Range: not available
  • Flash Rate/ Minute: 80
  • Mounting: Select from above: 240mm pole mount with M20  thread and nuts, pole and flat surface tulip base,  right angle bracket.
  • IP56
  • Listings: CE