Andon Tower Light LED 56mm 4 Color

Andon Tower Light LED 56mm 4 Color
Quantity in Basket: None
Code: PRE-F-4
Price: $163.75
Shipping Weight: 3.00 pounds
Select Lens Color (choose 4):
 
Select Lens Color Red 
 
Select Lens Color Amber 
 
Select Lens Color Green 
 
Select Lens Color Blue 
 
Select Lens Color Clear 
Select Voltage:
120VAC 
240VAC 
24VDC/VAC 
12VDC/VAC 
Select Pole/Pipe Option:
43mm (1 3/4 inch) Pole & M20 Nut MAP-M043 Add $5.40
240mm (9 1/2 inch) Pole & M20 Nuts MAP-M240 Add $11.00
22mm (7/8 inch) Pole for Tulip Base MAP-0022 Add $1.40
240mm (9 1/2 inch) Pole for Tulip Base MAP-0240 Add $6.20
750mm (29 inch) Pole for Tulip Base MAP-0750 Add $25.95
1/2 inch NPT conversion nipple MAP-N033 Add $8.50
750mm (29 inch) Pole & M20 Nuts MAP-M750 Add $34.95
Mounting Option:
Tulip Base-(select correct Tulip Base Pole without Nut-select above) Add $1.90
Right angle bracket-(requires pole with nuts) Add $3.75
Additional Options:
 
Buzzer Option-80db@1 meter (not for 12 volt models) Add $15.75
 
Flashing (FREE)Option 
Right Angle bracket with wiring cavity-(requires Tulip Base above, And Pole with no nuts-select above):
Right Angle bracket with wiring cavity-(requires Tulip Base above, And Pole with no nuts-select above) Add $10.50
Quantity:
Right Angle Steel Bracket
Right Angle Steel Bracket 		240mm Pole with M20 Nut
240mm Pole with M20 Nut 		1/2 inch NPT conversion
1/2 inch NPT conversion
Right angle bracket with cavity and tulip
Right angle bracket with cavity and tulip 		43mm Pole with M20 Nut example
43mm Pole with M20 Nut example 		Tulip base and short 22mm pole
Tulip base and short 22mm pole
Right Angle Steel bracket and 43mm pole with nut
Right Angle Steel bracket and 43mm pole with nut

Model PRE-F LED Andon Tower Light 56mm (2 1/4 inch diameter)is capable of either Continuous burning (standard), or flashing (now a FREE option) the LED light. Pre-wired and pre-assembled, this unit can be used with the mounting options shown above (use "check box" selection). Specify the color of the four color tower by using the "check box" above, the tower can be 4 of the 5 colors shown, and have a buzzer on top if you require (except 12 volt models.  Lenses are heat and shock resistant polycarbonate. Colored LED light modules can be added later if desired--contact us for part#s. Prism-cut lens design provides superior light diffusion, 80 flashes per minute if used in a flashing mode. LED lamps resist vibration, and virtually eliminate maintenance. Buzzer option is available and produces a pulsed beep buzzer tone at 80db@1 meter (must be mounted as the top most component on the tower)IP56 rated. CE compliant, Specify Voltage by selecting above. If you prefer a turnkey assembled solution, please see the PREF-110-3-Custom on our site for an example of our popular assembled versions.

An LED Tower Light at a price that will not break the bank!

  • Voltage available: 12VDC/12VAC, 24VDC/24VAC, 110VAC, 240VAC
  • Operating Current: from 124mA to 223mA depending on voltage
  • Temperature Range: not available
  • Flash Rate/ Minute: 80
  • Mounting: Select from above: 240mm pole mount with M20  thread and nuts, pole and flat surface tulip base,  right angle bracket.
  • IP56
  • Listings: CE