Andon Tower Light LED 56mm 1 Color
	Quantity in Basket: None Code: PRE-F-1 Price: $71.90 Shipping Weight: 2.00 pounds
	Select Lens Color (only 1):    Select Lens Color Red    Select Lens Color Amber    Select Lens Color Green    Select Lens Color Blue    Select Lens Color Clear  Select Voltage:  120VAC  240VAC  24VDC/VAC  12VDC/VAC  Select Pole/Pipe Option:  240mm (9 1/2 inch) Pole & M20 Nuts MAP-M240 Add $11.00 43mm (1 3/4 inch) Pole & M20 Nut MAP-M043 Add $5.40 240mm (9 1/2 inch) Pole for Tulip Base MAP-0240 Add $6.20 22mm (7/8 inch) Pole for Tulip Base MAP-0022 Add $1.40 1/2 inch NPT conversion nipple MAP-N033 Add $8.50 750mm (29 inch) Pole for Tulip Base MAP-0750 Add $25.95 750mm (29 inch) Pole & M20 Nuts MAP-M750 Add $34.95 Mounting Option:  Tulip Base-(select correct Tulip Base Pole without M20 Nuts-select above) Add $1.60 Right angle Steel bracket-(requires pole with M20 nuts) Add $3.75 Right Angle bracket with wiring cavity-(requires Tulip Base above, And Pole with no nuts-select above):   Add $10.50 Additional Options:    Flashing (FREE)Option    Buzzer Option-80db@1 meter (not for 12 volt models) Add $15.75
	Quantity:
Model PRE-F LED Andon Tower Light 56mm (2 1/4" diameter) is capable of either Continuous burning (standard), or flashing (now a FREE option) the LED light. Pre-wired and pre-assembled, this unit can be used with the mounting options shown above (use "check box" selection). Specify the color of the single color tower by using the "check box" above, the tower can be 1 of the 5 colors shown, and have a buzzer on top if you require (except 12 volt models).  Lenses are heat and shock resistant polycarbonate. Additional colored LED modules can be added later if desired--contact us for part#s. Prism-cut lens design provides superior light diffusion, 80 flashes per minute if used in a flashing mode. LED lamps resist vibration, and virtually eliminate maintenance. Buzzer option is available and produces a pulsed beep buzzer tone at 80db@1 meter (must be mounted as the top most component on the tower)IP56 rated (except if buzzer option is used). CE compliant, Specify Voltage by selecting above. If you prefer a turnkey assembled solution, please see the PREF-110-3-Custom on our site for an example of our popular assembled versions--also available in a single color LED unit--please inquire. An LED Tower Light at a price that will not break the bank! Voltage available: 12VDC/12VAC, 24VDC/24VAC, 110VAC, 240VAC Operating Current: from 25mA to 275mA depending on voltage Temperature Range: not available Flash Rate/ Minute: 80 Mounting: Select from above: various pole length with M20  threads and nuts, pole and flat surface tulip base,  right angle bracket, right angle support base used with no nut poles and tulip base. IP56 Listings: CE

Right Angle Steel Bracket	240mm Pole with M20 Nuts	1/2 inch NPT conversion
Right angle bracket with cavity and tulip	43mm Pole with M20 Nut example	Tulip base and short 22mm pole
Right Angle Steel bracket and 43mm pole with nut