Battery Powered Flashing LED 630
	Quantity in Basket: None Code: 630LED Price: $63.75 Shipping Weight: 4.00 pounds
	Select Lens Color:  Red Lens  Blue Lens  Amber Lens    Optional "D" Size Battery Holders for Customer supplied batteries (Set of 2)) Add $10.00
	Quantity:
Model 630LED Portable battery operated Flashing LED Light utilizes 4 LED bulbs to project an omni-directional light pattern. Internal switch allows for steady burn or flashing mode. Uses two 6 VDC spring terminal lantern batteries (not included), has a heavy magnetic base, an internal on/off switch is accessible via a "pin key hole" in the enclosure, dimensions: 5" diameter and 10" high, specify dome color above when ordering.   Optional "D" size battery holders can be selected above to allow for the use of customer supplied "D" size batteries instead of lantern batteries--8 of the "D" size batteries are required and extend the duty time of the LED light significantly. A word about application: Battery powered lights like these, because of their moderate effective light output, the purpose of which is to extend the life of the batteries, don't lend themselves to use in bright ambient light areas, or where outdoor sunlight would be a factor.  Ideally, these lights are to be used mounted at heights ranging from ground level to 8 feet above ground. This height would allow them to be seen for people looking toward the light from distances of 10 feet to hundreds of feet away--again depending heavily on how well lit the area is with overhead lighting if indoors, etc.  The best mounting height for visibility is at eye level--on the same horizontal plane-4.5 to 5.5 feet or so. The greatest achieved brightness of the light produced by the signal is viewed at the lights lens "center" on axis--or the same horizontal plane in this case. Although strobe lights are similarly designed utilizing a fresnel lens to distribute the light "burst", their light output (burst) differs from simple "flashing bulb" lights whether they be LED bulbs or Incandescent bulb devices--In other words, a strobe light would be more effective if your application requires a greater level of effectiveness than the effectiveness described above for the Flashing Light 630LED. Please contact us for any assistance you may require in choosing the correct signal. What a GREAT Product! Use it indoors for caution light, or to mark hazards, or use it outdoors for construction, hazards, attention getting flash! Voltage available: 12 VDC (2 of a 6VDC Lantern Battery not included, or optional "D" size holders for customer supplied batteries)  Listings: None Indoor /Outdoor Use Candela: Good, Better, Best Rating:   Better