The 440 Stackable Strobe (Priced above for the 1 color version-less mounting options--add additional modules to build your stack Above) features multi-color signaling using strobes in any combination using the 5 available module colors.  Strobe lamps are gas (xenon) discharge lamps which have no filament to wear out or break. All modules operate over a worldwide AC input voltage range of 85–264VAC 50/60 Hz. They all use the same type of lamp and maintain a constant brightness and flash rate over the entire voltage range. The strobe flash produced by these lights add additional effectiveness in applications where a standard incandescent lamp fixture (MT5C andon light), or a LED fixture (PREF andon light) may be inadequate.

The Strobe modules separate at any level by removing two screws, so their position in the stack can be changed easily. All modules are sealed with o-rings so they may be used outdoor or indoors. Module colors available in Amber, Blue, Clear, Green and Red. The units are preassembled as ordered from a single color to as many as all five colors (specify when ordering). Wiring is accomplished by using the terminals on the base control board. The individual strobe tube lamps are replaceable for ease in maintenance.

The base has a 1/2" threaded external pipe thread. The optional 3 1/2 inch tall 440-Base provides a convenient tulip mounting base, and by adding the optional 16 inch or 32 inch pole extensions, the fixture can be elevated for greater effectiveness in your particular application. The optional MAM-DS30 right angle bracket with wiring cavity can be added to the 440-Stand for a wall/vertical surface mount.

We can also use the 440 Stackable Strobe to build a custom "plug and play" andon fixture similar to our PREF-110-3-Custom assembly with manual on/off switches and AC power cord--Please inquire.

Voltage and Amperage: 85–264VAC 50/60 Hz, 0.06 A average (7 watts per module)

Flash Rate:  60 to 80 FPM

Joule Flash Energy: 1.5